Against the backdrop of rapid development in the building materials industry, complete sets of gypsum powder equipment are becoming the focus of attention for many manufacturers. This intelligent equipment that integrates crushing, grinding, and collection has reshaped the traditional powder production mode with a new process design, bringing revolutionary efficiency improvements to gypsum powder production enterprises.
1、 Intelligent control throughout the entire process
The latest model of complete equipment adopts PLC intelligent control system, and parameter setting and online monitoring can be completed through touch screen interface. After the raw materials are roughly crushed by the E-type crusher, they are sent to the Raymond mill through a bucket elevator for fine grinding. The powder collection system equipped with a pulse dust collector ensures zero dust overflow throughout the entire process. The system can freely match modules according to production capacity requirements, achieving flexible configuration with an annual output of 50000 to 500000 tons, effectively solving the problem of capacity improvement for small and medium-sized enterprises.
2、 Significant advantages in performance parameters
The test data shows that high-quality equipment can achieve an hourly output of 8-12 tons under full load operation, and the finished product particle size can be precisely controlled in the range of 80-200 mesh. Compared with traditional powder production processes, the system energy consumption is reduced by more than 30%, and equipment noise is controlled within 75dB. The intelligent lubrication system ensures that the service life of key components is extended to 8000 hours, and the equipped automatic overload protection device reduces equipment failure rate by 70%.
3、 Green and environmentally friendly design concept
The new equipment innovatively adopts a negative pressure dust removal system, with a dust collection efficiency of up to 99.5%, and the workshop dust concentration is stably controlled within 1mg/m ³. The vibration amplitude of the equipment during operation is controlled within 0.5mm, and the equipped soundproof cover can reduce the working environment noise to below 65dB. Continuous work monitoring shows that the system's energy consumption is reduced by 25% -35% compared to traditional equipment, and the production cost per ton of product is significantly reduced.
This equipment achieves dual breakthroughs in automated production and environmental compliance through technological innovation, and is becoming an important force in promoting technological upgrading in the gypsum powder industry. Enterprises should pay attention to brand technology accumulation and after-sales guarantee system when choosing, to ensure the long-term stable operation of equipment.