Gypsum powder, as an important industrial raw material, is widely used in building materials, chemical industry and other fields. The cost of purchasing processing equipment varies significantly due to differences in process requirements, production capacity, and equipment configuration. This article will systematically sort out the key factors that affect equipment prices and provide reasonable budget references.
1、 Basic production line configuration (annual output of 30000 to 50000 tons)
Crushing system: Jaw crusher (PE400 × 600) costs about 20000 to 30000 yuan, hammer crusher (PCZ1308) costs about 40000 to 50000 yuan
Grinding system: Raymond mill (3R2715) costs about 150000 to 180000 yuan, with a matching pulse dust collector costing about 30000 yuan
Conveyor system: bucket elevator+screw conveyor combination, about 50000 to 60000 yuan
Control system: basic electrical control cabinet+automation module, approximately 30000 to 40000 yuan
The total price of basic configuration is about 320000-40000 yuan
2、 Mid to high end production line configuration (with an annual output of over 100000 tons)
Crushing system: Cone crusher (HST315) costs approximately 150000 to 180000 yuan
Grinding system: Vertical grinding machine (MLS4531) costs approximately 400000 to 500000 yuan
Environmental protection system: Pulse bag dust removal+desulfurization and denitrification device, about 150000 to 200000 yuan
Intelligent control: PLC fully automated control system costs about 100000-150000 yuan
The total price of the comprehensive configuration is about 900000 to 1.2 million yuan
3、 Analysis of Price Influencing Factors
Capacity scale: For every 50% increase in output, equipment investment increases by 30-40%
Product fineness: The higher the mesh requirement (such as 325 mesh or more), the higher the cost of the grinder increases by 20-30%
Raw material characteristics: Gypsum with high moisture content requires additional drying equipment (approximately 80000 to 120000 yuan)
Brand difference: The premium rate for imported equipment is about 30-50%
Reasonable planning of equipment configuration can meet production needs and control investment costs. Suggest conducting on-site inspections of equipment performance and comparing the after-sales service terms of different suppliers to ensure long-term stable operation.