Gypsum board complete equipment is a combination of a series of mechanical devices used for producing gypsum board.
1、 Raw material supply equipment
Gypsum powder conveyor
Its main function is to accurately transport gypsum powder from the storage bin to the next process. Generally, spiral conveyors are used, which push materials forward through the rotation of spiral blades. Its advantage is stable conveying volume, which can accurately control the conveying volume of gypsum powder and ensure the accurate proportion of gypsum raw materials in the subsequent production process.
Additive mixer
In the production of gypsum board, it is sometimes necessary to add some auxiliary agents such as starch, ammonium sulfate, etc. The additive mixer can thoroughly mix these additives with gypsum powder. It usually has stirring blades, which are driven by a motor to rotate and form a good mixing effect inside the container.
2、 Forming equipment
Paper faced gypsum board forming machine
This is the core part of the complete set of gypsum board equipment. It includes a device for laying upper and lower paper, an injection device for gypsum slurry, and a forming mold. When working, first lay the upper and lower protective paper on the forming table, and then evenly inject the prepared gypsum slurry into between the papers through a pump. After extrusion, forming and other processes, the gypsum slurry is wrapped in the paper to form a gypsum slab with a certain thickness and shape.
Hollow gypsum board forming machine
Similar to paper faced gypsum board molding machines, but hollow structures are formed through special molds and processes during the molding process. This equipment plays an important role in the production of lightweight, soundproof and heat-insulating hollow gypsum boards.
3、 Cutting equipment
Vertical cutting saw
After the gypsum slab is formed, its length often does not meet the standard specifications. The longitudinal cutting saw can cut gypsum slabs longitudinally according to the set length. It has high-precision cutting tools that can ensure a flat and smooth cutting surface.
Horizontal cutting saw
Mainly used for horizontal cutting of gypsum boards after longitudinal cutting to achieve the final product width requirements. Horizontal cutting saws are usually equipped with automatic positioning devices that can accurately perform cutting operations according to the set width.
4、 Drying and finished product processing equipment
dryer
Gypsum board has a high moisture content after molding and requires drying treatment. The dryer evaporates the moisture in the gypsum board through a hot air circulation system. The temperature, humidity, and ventilation parameters can be adjusted according to the type and production requirements of the gypsum board.
Finished product stacker crane
Dried gypsum boards need to be neatly stacked and stored or transported. The finished stacker crane can automatically stack gypsum boards in the specified quantity and manner, improving production efficiency and facilitating management.